User's Manual
Table Of Contents
20
DISPL
AY
Battery status
indicator
External
power connected
P/p
Priority On/Priority
Off
S/s
Skip On/Skip
Off
D/d
Delay On/Delay
Off
L/-
Lock
Out
On/Lock
Out Off
EZ Scan
Library
Your scanner comes
with
an installed MicroSD
card
that
contains
the
entire USA/Canadian RadioReference
database as
well
as
the
EZ Scan
software.
Note:
Make
a
copy
of the
EZ Scan
software files
in
case
the
SD card
is
lost
or damaged.
To remove
the
MicroSD card
from the scanner:
WARNING:
To prevent corrupted data
on the
SD
Card, always
turn the
scanner
off
using
the front panel
power
key before opening
the battery compartment
cover.
1.
Turn
off
scanner,
unplug
external power,
and
remove
the batteries.
2.
Press and release
the
MicroSD
card.
3.
To reinsert
the
MicroSD card,
with the label
facing
the front of the
radio press
it in until it clicks
in place.
NOTE:
Always use
the
EZ Scan
software
“Prepare
Scanner Memory/SD Card For Use”
option
under
the
“Scanner/ SD Card”
menu to format the
SD Card
if the
card is
not
performing
as expected
or if the scanner
does
not
power
up with the
SD
Card.
The MicroSD card comes
formatted for the standard
FAT
file
system
with
a cluster size
of 32k.
To format additional
cards (2GB
or
smaller), use only
the
EZ Scan
software
to
format
the
SD
card.
• Format using the
FAT file system
with
32k
clusters
.
DRAFT