User's Manual

25
EDITING OBJECTS M ANU AL L Y
Editing Objects Manually
From the main menu, select Browse Objects , browse
to an object and press Menu . Note : Not all options are
available on all objects.
Alpha Tag
The object name. Press  or  to move
the cursor; press orto change the
value.
Set Scanlists
Changes the objects Scanlists.
RX Mode
Changes object’s receive mode: FM, NFM
(Narrow FM), Auto, AM
SQ Mode
Changes object’s Squelch mode: None,
CTCSS, DCS, NAC, SRCH (Search)
SQ Search
Turns Squelch Search on or off
Store SQ
Code
Only appears when MENU is pressed while
monitoring a conventional channel that is
set for CTCSS or DCS search mode. Select
Store SQ code to store the
value of the found CTCSS or DCS code.
Subsequent transmissions must have
matching CTCSS or DCS squelch codes to
be monitored by the scanner .
SQ Exclude
Turns Squelch Exclude on or off. Allows certain
CTCSS/DCS codes to be excluded.
Locked Out
Locked objects (indicated by an L ) are
not scanned.
Skipped
Skipped objects are not scanned.
Priority
EZ Scan frequently checks priority
channels for activity. Priority status is
indicated by an upper case P .
Delay
The scanner waits for a reply for two
seconds after a transmission ends before
resuming a scan.
Attenuate
Applies attenuation to the channel.
AGC
Reduces interference from strong local
transmitters. (Only available for conven-
tional frequencies.)
DRAFT