User's Manual

46
CONFIGURATION SE T TING
Configuration Settings (EZ S c an)
To access configuration settings, select Settings from
the main menu , and press  .
• Default Vals – Restores default settings.
• Simple Display – Limits displayed information.
• Default SL – Sets the default Scanlist.
• Priority Mode – Enables Priority mode.
• Priority Time – Time between priority scans.
• Enable Record – Turns on the record feature.
• Search Record – when active unit records
transmissions found while searching.
• G Atten Mode – Enables Global Attenuation.
• G Atten On – Activates Global Attenuation.
• Search Dg AGC – Applies Digital AGC to found
digital transmissions.
• G AGC Mode – Enables Global AGC.
• G AGC On – Activates Global AGC.
• Scan Sets Opt - Turns on Scan Set Feature.
• Sounds – Sets EZ Scan beeps and alert sounds.
• Alerts – Controls audio alerts.
• Key Beeps – Enables or disables key tones.
• Beep Volume – Sets key tone volume.
• Alert Volume – Object and low battery alert
volume.
• Contrast – Sets the LCD contrast.
• LModeBAT – Backlight mode during battery
operation.
• LModeEXT – Backlight mode during external
power operation.
• LiteArea – Sets LCD and keypad lighting.
• LiteTime – Backlight duration.
• LiteLevel – Controls backlight brightness.
• Welcome Text 1-5 – Sets the message when EZ
Scan is first turned on.
• Skip - Programmed to “lockout” will permanently locks
out an object when the SKIP button is pressed.
DRAFT