User's Manual
Table Of Contents
8
CONNECTING
ANTENNA
S
etup
Antenna
To connect
the
included
antenna:
1. Align the
slots around
the
antenna’s connector
with the
tabs
on the
antenna
jack.
2.
Press
the
antenna
down
over
the
jack and
turn the
antenna’s
base
clockwise
until it
locks
into place.
You can use a variety
of
antennas.
To
connect and external antenna,
follow
the installation instructions
supplied
with
the antenna. Always use 50-ohm coaxial cable,
such
as RG-58 or RG-8
low-loss dielectric coaxial cable. You
may
also need a BNC
adapter.
WARNING:
Use extreme caution
when
installing
or
removing an
outdoor
antenna.
If the
antenna
starts
to
fall,
let it go! It could
contact overhead
power
lines.
If the
antenna touches a
power
line,
touching
the
antenna, mast, cable,
or guy
wires can
cause
electrocution and death.
Call
the power company
to
remove
the
antenna. DO NOT
attempt to do so
yourself.
DRAFT