User's Manual

OPERATION

Power On And Self-Test

Each time your Whistler detector is turned on, an auto-

matic self-test sequence confirms that the speaker and

visual displays are functional.

• Turn Power/Volume control clockwise. Display reads:

Feature Engaged Confirmation

Each time a button is pressed one beep confirms feature

“on”, two beeps confirm feature “off”.

INSTALLATION

Visor Mounting (optional accessory )

• Slide the visor bracket into the bracket mounting slot.

• Clip the visor bracket onto the visor making sure it is

relatively level and has a clear view of the ro a d .

Power Connection

• Plug the small end of the power cord into the unit’s power

j a c k .

• Plug the large end into the vehicle’s cigarette lighter.

Fuse Replacement

The lighter socket plug is equipped with a replaceable 2

amp 3AG fuse located behind the silver tip. To replace the

fuse, carefully unscrew the tip of the plug. (I M P O R TA N T:

U n s c r ew slowly. The tip contains a spring which may fly out

when disassembling.) Insert the new fuse with the spring and

s c r ew on the tip. With use, screw cap on plug may loosen.

Retighten occasionally.

U n s c rew the tip of the lighter socket plug carefully when replacing the 2 amp

f u s e .

Insert into bracket mounting slot. Do not bend this

section of bracket.

Slide on view