User's Manual

LASER ALERTS / VG-2 ALERTS
VG-2 Audio/Visual Alerts
When a VG-2 signal is detected, the detector “hides” its own
radiated signal and becomes undetectable by the VG-2.
In Highway Mode
In City Mode — VG-2 LED flashes
Every 30 seconds, the detector checks for a VG-2 signal. If
a VG-2 signal is still present, the unit continues to hide and
repeats the VG-2 alert. If no signal is detected, two beeps
are provided, indicating an “all clear” condition. During
VG-2 Alert X, K, and Ka band signals cannot be received.
Note: VG-2 must be turned on to receive VG-2 alerts.
Alert Priority
When two or more signals are received at the same time,
the alert priority is:
1. Laser
2. VG-2
3. Speed Radar
4. Safety Radar
Example:
If X band is alerting, then suddenly VG-2 is detected, the
VG-2 warning will override the X band alert.
15
SAFETY RADAR ALERTS
In communities where transmitters are located, the Safety
Warning System displays over 60 voice messages. When
Safety Radar is detected the audio alert is geiger counter-
like.
Note: Not all areas have Safety Warning System transmitters. Visit
www.safetyradar.com for Safety Warning Systems transmitter loca-
tions.
Laser Audio/Visual Alerts
When a laser signal is detected the alert LED’s illuminate
from right to left in a rolling pattern. The audio alert is con-
tinuous for a minimum of 3 seconds. Example:
14
Ka
X
K
PWR Alert
City
VG-2
Ka
X
K
PWR Alert
City
VG-2
Alert LED1 and
LED4 flash