OWNER’S MANUAL 1783/93SE LASER/RADAR DETECTOR THE WHISTLER GROUP CORPORATE HEADQUARTERS 13016 N. Walton Blvd. Bentonville, AR 72712 TEL (479) 273-6012 FX (479) 273-2927 www.whistlergroup.com CUSTOMER RETURN CENTER 1201 N. Dixieland Rd. Rogers, AR 72756 Customer Service Tel (800) 531-0004 Email: info@whistlergroup.
INTRODUCTION If you have questions concerning the operation of this Whistler product please call consumer relations: 1-800-531-0004 Hours: Monday - Friday 8:00 am - 5:00 pm CT or visit www.whistlergroup.com Please keep the receipt in a safe place. If the unit is returned without a dated store receipt an out of warranty service charge applies. Note: Your warranty period begins at the time of purchase. The warranty is validated only by a copy of the original store receipt.
TABLE OF CONTENTS Topic Page Model Features Summary ....................................................3 - 5 Installation .............................................................................6 - 9 • Mounting Guidelines • Dash/Visor/Windshield Mounting • Power Connection And Fuse Replacement • Compass Calibration Set-up Operation.............................................................................
WHISTLER FEATURES WHISTLER FEATURES 6. High Visibility Display – Provides distinct visual confirmation of signals detected, signal strength, and indicates engaged modes of operation. 7. Quiet/Menu Button - Pressing QUIET before a signal is detected engages Auto Quiet Mode which automatically reduces the audio level after the initial warning to a low audio level setting. Pressing QUIET during a radar/laser encounter silences audio alerts, while allowing visual alerts to keep you informed.
INSTALLATION Mounting Guidelines • Mount the unit as low and level as possible near the center of the windshield. Unit must be level for compass to function properly. • Do not mount your unit behind wipers, ornaments, mirrored sunscreens, etc. These obstructions have metal surfaces which can affect radar and laser signals and reduce critical warning time. (Regular tinted glass does not affect reception.) • Some windshields have an Instaclear™ or Electriclear™ type coating, which affect radar signals.
INSTALLATION INSTALLATION Visor Mounting (optional accessory) • Slide the visor bracket into the bracket mounting slot. • Clip the visor bracket onto the visor making sure it is relatively level and has a clear view of the road. Compass Calibration Set-up The unit will need to be calibrated in order for the compass to provide accurate readings. To calibrate the unit, perform the following procedure: 1. Mount the unit level in the center of the vehicle’s windshield in which it will be used.
OPERATION OPERATION Power On And Self-Test Each time your Whistler detector is turned on, an automatic self-test sequence confirms that the speaker and visual displays are functional. • Press (Power) or apply Power. Display reads: Memory/Beep Confirmation All features selected (except Stay Alert and Quiet) are retained in memory. Each time a button is pressed one beep confirms feature “on”, two beeps confirm feature “off”.
OPERATION OPERATION Auto Quiet Mode Auto Quiet reduces the selected audio level to level (1) approximately 5 seconds after a radar or safety radar signal is detected. The alert for any new signal within 20 seconds will resume at level (1). Auto Quiet does not affect VG-2 or laser alerts. • Press Quiet/Menu (before a signal is detected) to engage Auto Quiet.
OPERATION Dim/Dark Mode Dim/Dark Mode reduces the illumination of the display. • Press and hold (Power) for 2 seconds to reduce illumination to a Dim setting. Display reads: • Pressing and holding for 2 seconds a second time engages Dark Mode. Display reads: Dim or dark can be engaged during an alert. In Dark Mode, the display goes dark for as long as a signal is being detected and for 20 seconds after, then the display returns to the dimmer setting.
OPERATION OPERATION Option Select Mode Entering Option Select Mode allows you to customize options such as Tone Select, Compass Select, Abbreviated Power Up Sequence and VG-2 Mode. When selecting options, the , or must be pressed within 20 seconds or options mode will automatically be exited. To enter: Teach/Tutorial Mode Provides simulated alerts for each type of signal. • Press City and (Quiet) simultaneously and release.
OPERATION OPERATION • Press and release the (Quiet/Record) button to begin a recording. Note: Recording starts as soon as the button is released. Display reads: To exit Memo mode: • Press memo button and release. The unit will beep twice. NOTE: Memo mode automatically exits within 20 seconds if a button is not pressed. REC1 8 REC = record, 1 = track #, 8 = time remaining If the recording time expires for a track, the unit will automatically switch to the next track.
RADAR– ALERTS SAFETY RADAR ALERTS Speed Radar Audio/Visual Alerts When X, K or Ka is detected the band ID and signal strength is displayed. The audio alert is continuous and has a geiger counter-like pattern. The faster the beep the closer or stronger the radar source. Example: In communities where transmitters are located, the Safety Warning System displays over 60 text messages. When Safety Radar is detected the audio alert is geiger counterlike.
LASER/VG-2 ALERTS Laser Audio/Visual Alerts When a laser signal is detected the word “Laser” and signal strength is displayed, the audio alert is continuous for a minimum of 3 seconds. Example: The more “|||” the closer the laser source. VG-2 Audio/Visual Alerts Note: You must turn this feature on in option select mode before it will detect VG-2. When a VG-2 signal is detected, the detector “hides” its own radiated signal and becomes undetectable by the VG-2. Text message confirms detection of VG-2.
CARE & MAINTENANCE Care And Maintenance During the summer months, avoid prolonged exposure to direct sunlight by removing your unit from the dash when your vehicle is parked for an extended period of time. Do not spray water, cleaners or polishes directly onto the unit. The spray may penetrate through the openings and damage the unit. Also, do not use any abrasive cleaners on the unit’s exterior.
ARE DETECTORS LEGAL? In Most States YES! Laser detectors are completely legal in every state when used in automobiles or light trucks (under 10,000 lbs.). Similarly, when used in automobiles or light trucks, radar detectors are legal in almost every state. Exceptions are Virginia and Washington, D.C., which have local regulations restricting the use of radar receivers in any vehicle. Concerning trucks over 10,000 lbs.
SPEED MONITORING TECHNOLOGIES WARRANTY INFORMATION Other Speed Detection Systems Several techniques other than radar or laser are used to measure vehicle speeds. When these methods are being used, no detector can provide a warning. These techniques include: • Pacing - A patrol car drives behind you and matches your driving speed. • Vascar/Aircraft - The time it takes a vehicle to travel a known distance is measured.
WARRANTY INFORMATION WARRANTY INFORMATION IMPORTANT: Whistler will not assume responsibility for loss or damage incurred in shipping. Therefore, please ship your unit insured with return receipt requested. CODs will not be accepted! Service Out Of Warranty Units will be repaired at “out of warranty” service rates when: • The unit’s original warranty has expired. • Dated proof of purchase is not supplied. • The unit has been returned without its serial number.
ACCESSORIES SPECIFICATIONS • Dimensions: 1.6"H x 2.9"W x 4.5"L • Weight: 7.5 oz. • Laser Wavelength: 905 ± 50 nanometers (nm) • Radar Frequencies: 10.500 - 10.550 GHz (X Band) 24.050 - 24.250 GHz (K Band ) 33.400 - 36.000 GHz (Ka Superwideband) • Operating Temperature Range: -20˚ C to +80˚ C (-4˚ F to +176˚ F) • Power Requirements: Operational 12 to 15 volts DC, 250mA nominal Vehicle Battery Saver, 70mA nominal. • Compass: Accuracy to 5°, Resolution to 5°.
ACCESSORY ORDER FORM PLEASE SHIP TO: Name______________________________________________ Street______________________________________________ City________________________State_______Zip_________ Telephone Number (______) __________________________ Order Code/Description Quantity Total Price $ NOTES ___________________________________________________ ___________________________________________________ ___________________________________________________ ___________________________________________________ ____
