User Manual

10
ATTACH TO VEHICLE
STEP 3
Attach license plate to vehicle
Once you have tested the camera system and ensured the
pairing between the backup camera and monitor, you are
ready to reattach the license plate to your vehicle.
Be sure to use the appropriate mounting screws for your
vehicle (included).
The camera angle should be adjusted to provide an optimal
view of objects behind the vehicle.
Note: Do not exceed 45 degrees up/down from central
position.
Adjust the camera angle as required:
• Loosen the two screws below the camera a few turns.
• To adjust the camera angle, tilt the camera to the correct
angle. (Do not force the camera)
• The camera should be adjusted to a horizontal position
relative to the ground, so as to provide optimal view of
objects behind the vehicle.
• Carefully tighten the 2 screws to prevent the camera
angle from moving during vibrations from driving.