User Manual

16
TROUBLESHOOTING
If the monitor does not turn on when power is applied:
• Check to make sure the power source is active (if your
12V power port is switched with the vehicle ignition, your
monitor will only work when the vehicle is running or the
key is in the ON position)
• Check to make sure the fuse and power cord are in
working order
• With power applied to the monitor, touch the
If the monitor does not display images within a few
seconds of pressing the button:
• The battery in the camera may be depleted and require
recharging
• The signal may be weak due to positioning of the camera
and monitor (try re-positioning the monitor to another
location)
If the video image is poor:
• Check that the camera lens is clean from road grime,
snow, or ice
If the video image is dark:
• Replace the vehicle's old backup and license plate bulbs
with new LED type bulbs
If the image appears to shake when the vehicle is moving:
• Check the camera mounting screws to the vehicle and
retighten if needed
• Check the camera tilt adjustment and retighten the screws
if loose.
If the video image does not last the user selected Time-Out
period:
• Re-check the Time-Out selection
• Recharge the battery in the camera