User Manual

NOTE: Domestic and Import license plate screws are

included and should be compatible with the vast majority of

vehicles. Should your vehicle require a special diameter or

thread, please consult your dealer.

PAIRING MONITOR TO CAMERA

Your WBU-1000 should automatically pair with your monitor.

If your monitor does not automatically pair with the camera

after initial charge, the following steps are to be used.

1. Disconnect both solar cell connections

2. Power on monitor

3. Touch then or to place cursor over SETUP, then

touch to select

4. With PAIR icon selected, touch to begin the pair

process

5. Connect both solar cell connections to turn on the

camera

Pair OK will be displayed when the pairing process is

completed.

ASSEMBLY / INSTALLATION