Owner`s manual

PROBLEM: Unit alarms when vehicle hits bumps.

• Check for loose lighter socket; tighten and clean.

• Check connections at both ends of the power cord.

Substitute another cord to determine if the cord is

defective. Return defective cord to the factory.

PROBLEM: Unit falses too much.

• IfalarmsarePOPKa,switchPOPModetooff.

• Iftheaboveoptiondoesn’thelp,useahigherKaFilter

setting or if Ka is not used turn Ka band off.

• IfalarmsareXorKbandandduetoradarbasedtraffic

flow sensors or radar based vehicle blind spot

detectors, use a higher X/K Filter setting.

If difficulties occur which cannot be solved by information in this

Troubleshooting Guide, please call Whistler Customer Service at

1-479-273-6012 or visit our FAQ page at www.whistlergroup.com,

before returning your unit for service.

Arial font text

TROUBLESHOOTING