Owner`s manual

TROUBLESHOOTING GUIDE
Your unit is expertly engineered and designed
to exacting quality standards to provide you
with
reliable, trouble-free operation. If your unit
has been correctly installed following the
guidelines in this manual, but is not operating
optimally,
please refer to the troubleshooting
guide
below.
PROBLEM:
No display or audio.
Check fuse in Whistler plug; replace if
necessary with a 2 amp, 3AG type. Check fuse
for lighter socket; replace if necessary. Make sure
lighter socket is clean.
PROBLEM: Audio alerts are not loud
enough.
Check audio level setting (see
pg. 10).
PROBLEM: Unit resets when vehicle hits
bumps. Check for loose lighter socket" tighten
and clean. Check connections at both ends of
power cord. Substitute another cord to
determine if cord is defective. Return
defective
cord to the factory.
If difficultie; cx:cur vvhich cannot ~ saved ty
infmrntim in this Troubleshooting Guide, please
call \XJhistler Customer Service at
1-800-531-0004 or visit our FAG page at
VVvVvV.vvt1istlergroup.com before returning your
unit
for seNice.
18