User Guide

Squelch

Power

Press and

hold to turn

ON/OFF.

Press

briefly to

toggle the

backlight.

/II/SEL – controls the Scan, Pause, and Playback

modes, and is used in menus to select, enable, or

disable options.

Four Way Push button Pad – ,   keys are used

for navigation while browsing objects and menus.

Alphanumeric Keypad – quick data entry of

frequencies, talkgroup ID and labels. While scanning,

pressing 1 thru 200 will toggle the selected scanlist on

or off. Each button must be pressed within 2 seconds

of the last. If more than 1 scanlist will be toggled on or

off, press the decimal once as a separator. Pressing the

decimal twice will end the sequence.

Example: If you wish to toggle scanlist 9 you press 9 If

you wish to toggle scanlist 9, 11, and 22 simply press

the following 9 . 11 . 22 or 9 . 11 . 22 . or 9 . 11 . 22 ..

Turn on Scanner and Set Squelch

Preset squelch between 10 and 12 o’clock position.

While scanning, turn the knob down (counterclockwise)

until you hear noise then up (clockwise) a little past

where the noise stops. The higher the squelch is set, the

stronger the signal required to break the squelch.