User Guide

14
Setting Bandplan and Clock
When you first power up your scanner it will prompt you
to set the bandplan, date and time.
Press the  or  key to select the USA or Canada
bandplan, then press /II/SEL.
-Bandplan- -Bandplan-
 USA   Canada 
Press SEL to Set Press SEL to Set
The scanner will then prompt you to enter the current
date and time. Press the  or  key to select the
desired digit, then press the  key. Press the  or 
key to change the value, then press /II/SEL. You can
skip this process by pressing the SKIP key. You can set
the clock at any time using the EZ Scan Software.
-Set Clock-
2015-06-03 Wed
11:00:00
Press SEL to Set or SKIP to Exit
The Bandplan and Date/Time prompts appear only
once on initial power-up. You can change the Date and
Time from the Main Menu and the Bandplan from the
Global Setting menu.