User Guide

21

Display Icons
A row of icons at the top of the display provides status
information about the scanner. These icons are defined
as follows:
S Squelch circuit (or “gate”) is open
S Squelch circuit (or “gate”) is open DMR
G When present, the attenuator is set for Global
mode
A When present, the attenuator is active
GA When present, Global attenuator is on, and the
attenuator is active
AM AM mode is active
FM FM mode is active
NF Narrow FM mode is active
DG The radio is receiving P25/DMR digital audio with
AGC
Dg The radio is receiving P25 digital audio without
AGC
D2 The radio is receiving P25 Phase II digital audio,
with or without AGC
Fn Function key is active
 Scan mode (scanning)
Pause mode (monitoring a single Object)
Being recorded on the active or selected Object
F Recording is enabled but recording is suspended.
The SD card is almost out of space.
Signal meter indicating strength
T Currently receiving trunking control channel data
E Encrypted digital traffic detected
IF The radio’s IF (discriminator) output mode is active
P/p Priority On/Priority Off
S/s Skip On/Skip Off
D/d Delay On/Delay Off
L/- Lock Out On/Lock Out Off
Battery status Indicator
External power connected