User Guide

35
• Wildcard Private Call: will monitor all private call
radio traffic on the desired trunked radio system (in
the TGID field, and set the Type field to Private)
• Private Call with ID: will only monitor private call
radio traffic on the specified TGID (enter the desired
Radio ID in the TGID field, and set the Type field to
Private)
NOTE: For now, just let your new objects go to the
default Scan List. Later in this section we will show you
how you can group your objects into Scan Lists.
Talkgroup Object (TGRP)
Talkgroup Object (TGRP)
A Trunking Talkgroup Object (TGRP) is a record that
stores the parameters for a trunked talkgroup on a
trunked radio system. When you create a TGRP object,
you are creating an object that will allow you to scan
and monitor a talkgroup on a particular trunked radio
system.
Importing DMR systems using
the EZ Scan PC Application
Importing DMR systems using the EZ Scan PC
Application is nearly identical to importing any other
type of trunked radio system. The most significant
difference between DMR systems verses other types
of systems is that the scanner does not use the DMR
control channel. Instead, your scanner will attempt
to scan all sites and all frequencies for each site to
determine if there is activity to be monitored.
When programming DMR systems, it is recommended
that you select/import and/or only enable the sites that
you believe will be in range of your location.
NOTE: The following steps assume you have “Set
Location” to off in the EZ Scan PC Application General
Settings tab and/or you have selected the “Preferred”
type for importing systems.
1. Click on the Library Import tab.
2. In the Select State/Province list, click on your
state.
3. In the data type box to the right, double-click on
Counties/Cities.
4. In the Counties/Cities list on the left, click on your
county.
5. In the Data Type box to the right, double-click on
Systems.