User Guide

38
7. With the new system row highlighted at the top
of the display, you will see the Trunked System
Site Information section on the bottom half of the
screen.
8. If not already selected/displayed, click on the Site
Details tab.
9. Click on the “Site 001” label in the Alpha Tag
column to select and enable editing of the site
frequencies.
10. Enter the site frequencies in the Frequency column
of the Site Frequencies tab.
a. NOTE: For best performance enter all of
the frequencies for the site (control, alternate, or
otherwise). Do not enter duplicate frequencies.
11. Click on the Talkgroup Details tab of the Trunked
System Site Information panel to see talkgroups
currently loaded into your configuration.
12. If a wildcard object does not already exist for this
system, click the Add Wildcard button on the right
side of the screen. When the scanlist pop-up panel
appears, select the scanlist that you want to assign
the wildcard object to.
13. To add a Radio ID wildcard object, click on
the Radio ID Details tab and click on the Add
Wildcard button to the right. When the scanlist
pop-up panel appears, select the scanlist that you
want to assign the wildcard object to.
Don’t forget to write your configuration to the SD card
of your radio using the Scanner/SD Card menu option
at the top of the EZ Scan PC Application.