User Guide

To enable or disable Scanlists:

While scanning, pressing 1 thru 200 will toggle the

selected scanlist on or off. Each button must be pressed

within 2 second of the last. If more than 1 scanlist

will be toggled on or off, press the decimal once as

a separator. Pressing the decimal twice will end the

sequence.

Example: If you wish to toggle scanlist 9 you press 9 If

you wish to toggle scanlist 9, 11, and 22 simply press

the following 9 . 11 . 22 or 9 . 11 . 22 . or 9 . 11 . 22..

To lock out objects:

1. From main menu, select Browse Objects, then press

.

2. Use the  keys to browse objects then press

MENU.

3. Select Locked Out and press . A checkmark ( )

indicates Lockout is selected. A square () indicates

Lockout is disabled. An uppercase L in the display

indicates a locked out frequency.

NOTE: The SKIP button can be programmed in the

Global Settings Menu (first option under the Expert

section) to perform the Lockout function.

To skip transmissions while scanning:

1. Wait for scanner to stop on the transmission and

press SKIP. An uppercase S in the display indicates

a skipped object.

2. To skip a specific object, you can browse to the

object and press SKIP.

3. To restore a skipped object, browse to it and press

SKIP.

4. To restore all skipped objects, in the main menu,

select Restore Skipped and press .

NOTE: If the specific object is locked out vs. skipped

the SKIP button may have been programmed as

Lockout function.