User Guide

• CONV Radio ID – Displays the Radio ID for

P25 conventional calls. Simple Display must be

unchecked.

• PC/IF CCDump – Streams ASCII Control Channel

Dump data over the USB interface for trunking

control channels.

To file – Stores ASCII Control Channel Dump data to

the SD card.

Limit 100

Trim Logs

• Low Batt Time – Interval (seconds) between low

battery alert sounds.

• Charge Time – Sets the radio charge time.

• TG Disp – Display format for talkgroup IDs.

• M36 Stat Bits – Uses status bits to track Motorola

3600 baud trunking talkgroup calls.

• M36 ENC

• EDACS Dig

• BandPlan – Selects USA or Canada.

• FlexStep - Permits using Split channel frequency.

• EncMode – For encrypted voice calls: Noise, Silent,

or Tone.

• EncLevel – Sets the encrypted call tone level.

• IF Out –Routes the IF Discriminator signal to the

headphone jack.

• DSP Level Adapt –Controls how fast the DSP adjusts

to varying P25 levels (default: 64). Higher values =

faster rates.

• ADC Gain – Controls input signal to CODEC

(default: +0dB).

• DAC Gain – Sets output signal from CODEC,

varying the audio level of decoded digital

signals (default: +0dB).

• Auto Power On

At 00:00

Mode:

• Location Select