User Manual

12
Always keep the magnets well away from magnetic
media such as discs and tapes, and from magnetically
sensitive equipment such as computer monitors and
watches to avoid deleting data or damaging the
equipment.
The rare earth magnets can be damaged by heat; avoid
temperatures greater than 175 degrees Fahrenheit
(80 degrees Celsius), such as in parked cars. Hotter
temperatures will permanently weaken the magnets.
LAN Cable Specification:
Interface: RS-485 compatible
Interface cable: 8P8C modular plug, Type B, Straight
cable 6½ feet
WARNING: Use only the supplied 8P8C Type B straight
cable (CAT 5 or CAT 6) to connect the remote head to
the base unit up to 100 feet in length. Other types of
cable including crossover cables may damage both the
remote head and base unit.
Understanding the Keypad
Your scanner features a back-lit keypad as shown below
in addition to the power button located at the front of
the remote control head.
POWER/BACKLIGHT – is located to the bottom
right of the remote head. Press and hold until the
display reads “release button” to turn the scanner on
and off. Press briefly to confirm the backlight level.
When the backlight level appears, rotate rotary encoder
to increase/ decrease the backlight level.
MENU – provides access to additional functions related
to the current operating mode of the scanner, and
provides access to the Main Menu, where the main
functions are controlled.