User Manual

WX – provides instant access to NOAA Weather Radio

broadcasts and SAME Weather Alert Receiver mode.

Press twice to select SKYWARN

Scanlist. (SKYWARN

requires one-time programming)

ATT – controls the attenuator function and cycles

between per object attenuation mode, Global

attenuation mode, and Global attenuation on.

PRI – toggles the Priority setting for selected or active

object, Fn PRI toggles Priority Mode on or off while

scanning.

SKIP – if pressed while monitoring or paused on

an Object, will temporarily disable reception on

the Object. Pressing SKIP again while the Object is

selected will resume normal monitoring. The SKIP key

can also be programmed to permanently lockout an

object if selected in the Global Settings menu. When

editing text, pressing the SKIP key clears all text at

and to the right of the cursor. When in Playback mode,

the SKIP key stops playback of the current recording,

and when playing multiple recordings, advances to

the next recording. When in Weather mode, the SKIP

key toggles between Normal weather radio mode and

SAME Standby mode. In many Menu functions, the

SKIP key is used to cancel or abort a pending change.

Fn – Activates alternate key functions.

/II/SEL – controls Scan, Pause and Playback modes,

and is used in menus to select, enable or disable

options.

Four Way Push button Pad –,   keys are used

for navigation while browsing objects and menus.

Alphanumeric Keypad – quick data entry of

frequencies, talkgroup IDs and labels. While scanning,

pressing 1 thru 200 will toggle the selected scanlist on

or off. Each button must be pressed within 2 seconds

of the last. If more than 1 scanlist will be toggled on or

off, press the decimal once as a separator. Pressing the

decimal twice will end the sequence.

Example: If you wish to toggle scanlist 9 you press 9 If

you wish to toggle scanlist 9, 11, and 22 simply press

the following 9 . 11 . 22 or 9 . 11 . 22 . or 9 . 11 . 22 ..