User Manual

23
There are many combinations of data that can be shown
on the Object display using the Show options in the
Global Settings menu. You can learn more about these
options in the Configuration Settings section of the
guide.
"psDr" Indicators
In the Individual Object displays there are four
characters on the right hand side of the display that
indicate the status of priority, skip/lockout, delay
and recording for the selected or active object. The
following indicators are possible:
p = priority off, P = priority on
s = skip off, S = skip on, L =lockout on
d = delay off, D =delay on
r = recording off, R =recording on
Display Icons
A row of icons at the top of the display provides status
information about the scanner. These icons are defined
as follows:
S Squelch circuit (or “gate”) is open
S Squelch circuit (or “gate”) is open DMR
G When present, the attenuator is set for Global mode
A When present, the attenuator is active
GA When present, Global attenuator is on, and the
attenuator is active
AM AM mode is active
FM FM mode is active
NF Narrow FM mode is active
DG The radio is receiving P25/DMR digital audio with
AGC
Dg The radio is receiving P25 digital audio without
AGC
D2 The radio is receiving P25 Phase II digital audio,
with or without AGC
Fn Function key is active
 Scan mode (scanning)
Pause mode (monitoring a single Object)
Being recorded on the active or selected Object