User Manual

24
F Recording is enabled but recording is suspended.
The SD card is almost out of space.
Signal meter indicating strength
T Currently receiving trunking control channel data
E Encrypted digital traffic detected
IF The radio’s IF (discriminator) output mode
is active.
P/p Priority On/Priority Off
S/s Skip On/Skip Off
D/d Delay On/Delay Off
L/- Lock Out On/Lock Out Off
EZ Scan Library
Your scanner comes with an installed SD card that
contains the entire USA/Canadian RadioReference
database as well as the EZ Scan software.
Note: Make a copy of the EZ Scan software files in case
the SD card is lost or damaged.
To remove the SD card from the scanner:
WARNING: To prevent corrupted data on the SD Card,
always turn the scanner off using the front panel power
button.
1. Turn off scanner; remove the control head to locate
the SD Card slot with SD card installed.
2. Press and release the SD card to eject it from the
scanner.
3. To reinsert the SD card, with the label facing up,
press it in until it clicks in place.
NOTE: Always use the EZ Scan software “Prepare
Scanner Memory/SD Card For Use” option under the
“Scanner/ SD Card”menu to format the SD Card if the
card is not performing as expected or if the scanner
does not power up with the SD Card.
The SD card comes formatted for the standard FAT32
file system with a cluster size of 32k.
To format additional cards (2GB or smaller), use only
the EZ Scan software to format the SD card.
• Format using the FAT file system with 32k clusters.
• If you use SD cards larger than 2GB, format using
FAT32 with 32k clusters.