User Manual

27
Preferred Programming - from
Library
1. From the Main Menu, select Browse Library.
2. Select country.
3. Select first letter of State/Province.
4. Select State/Province.
5. Select Counties/Cites.
6. Select first letter of County.
7. Select County.
8. Select Data Type NOTE: Police/Fire and Emergency
services will be in “Categories” for smaller towns,
“Systems” for larger ones.
9. Select desired agency, category or system available
for the county.
10. Select desired subcategory. Investigate listings by
pressing  to go deeper into that selection. When the
cursor switches from the right side of the screen to the
left, you are at the bottom of a category. NOTE: When
selecting a System, check at least one of the “Sites” in
range, then go further into Categories to find objects.
11. Use the SEL button to check boxes for services you
wish to monitor. Press SEL to uncheck a selected service
and at anytime press  to go back. Once all desired
objects have been checked, press MENU.
12. Select Import Selected.
13. Select desired scanlist location for selected objects
and press  to save. Note that Scanlist 001 is already
selected, so no need to select another scanlist the first
time. For the next scanlist, uncheck the first scanlist and
check the box for the desired scanlist, otherwise, you
will be adding every object to the first scanlist.
14. Press SEL to continue to main menu.
15. Select Scanlists from main menu. Use the
// / to rename the scanlist if desired. Confirm
box beside desired scanlist is checked.
16. Repeat steps to add additional scanlists, or select
Scan from the Main Menu to begin scanning.
17. Once you are happy with your programming, Use
the EZ Scan PC application to save data from the
scanner. Of course you can use any combination of
programming from the Scanner Keyboard or the PC
app, just keep track of which has the most updated list.
NOTE: When traveling or for quick programming, refer
to location based, ZIP code programming.