User Manual

38
4. In the Counties/Cities list on the left, click on your
county.
5. In the Data Type box to the right, double-click on
Systems.
DMR systems are denoted in this list by the type
Connect Plus, Capacity Plus, Linked Cap Plus, and
Hytera XPT in the last column of the displayed list of
systems.
1. Select the system you want to import by clicking
on the selection box to the left of the system.
2. For systems that may have more than one
transmitter site, click on the Sites button and
select the sites you want to import.
3. Load only selected talkgroups on this system by
pressing the Talkgroups button.
4. After your Site and Talkgroup selections have
been made, press the Import Selected Channels
button.
5. Select the scanlist you want to import this system
into by clicking on the box in the SEL column.
a. NOTE: You have options that may be set by
clicking on the Import Options button.
b. Add a “wildcard” to search for new
talkgroups and another to monitor for direct, radio
to radio “Private Calls”.
6. To perform the import, click the Import Channels
button on the lower left side of the screen.
7. After the import, you’ll have the option to return
and import more systems.
Searching for new/unknown talkgroups or Private
Calls and to selectively enable sites for a given
imported system
By default, you will hear only those talkgroups that
have been identified by other users which have been
submitted to Radio Reference for inclusion in the Radio
Reference Database.
If you didn’t select the wildcard option(s) during import,
you still have the option of enabling search for new
talkgroups on the system you imported by adding a
talkgroup “wildcard” object to your scanlist.
1. Click on the Trunked Radio Systems tab at the
top of the EZ Scan PC Application.