User Manual

41
Editing Objects Manually
From the main menu, select Browse Objects, browse to
an object and press Menu.
Note: Not all options are available on all objects.
Cancel Changes Cancels changes you have just made.
Save Changes Saves changes you have just made.
Edit System Edits system parameters.
Frequency Edit object frequency.
Alpha Tag The object name. Press  or  to move
the cursor; press orto change the
value.
Set Scanlists Changes the objects Scanlists.
DG Mode Toggles between analog, digital and
auto.
RX Mode Changes object’s receive mode: FM,
NFM (Narrow FM), Auto, AM
SQ Mode Changes object’s Squelch mode: None,
CTCSS, DCS, NAC, SRCH (Search)
SQ Search Turns Squelch Search on or off
Store SQ Code Only appears when MENU is pressed
while monitoring a conventional channel
that is set for CTCSS or DCS search
mode. Select Store SQ code
to store the value of the found
CTCSS or DCS code. Subsequent
transmissions must have matching CTCSS
or DCS squelch codes to be monitored.
SQ Exclude Turns Squelch Exclude on or off. Allows
certain CTCSS/DCS codes to be excluded.
Locked Out Locked objects (indicated by an L ) are
not scanned.
Skipped Skipped objects are not scanned.
Priority EZ Scan frequently checks priority
channels for activity. Priority status is
indicated by an upper case P .
Delay The scanner waits for a reply for two
seconds after a transmission ends before
resuming a scan
Attenuate Applies attenuation to the channel.
AGC Reduces interference from strong local
transmitters. (Only available for
conventional frequencies.)