User Manual

To monitor a frequency or talkgroup:

1. From the main menu, select Browse Objects, then

press .

2. Use the direction keys to browse Scanlists and

objects.

3. Press /II/SEL to monitor the displayed frequency.

4. Press  or  to select another object or press

/II/SEL to begin scanning.

To scan your active Scanlists:

1. Press Menu.

2. Select Scan from the main menu and press  or

/II/ SEL.

3. To pause the scan, press /II/SEL when scanner

stops on a transmission. To resume scanning, press

/II/SEL again.

To enable or disable Scanlists:

While scanning, pressing 1 thru 200 will toggle the

selected scanlist on or off. Each button must be pressed

within 2 second of the last. If more than 1 scanlist

will be toggled on or off, press the decimal once as

a separator. Pressing the decimal twice will end the

sequence.

Example: If you wish to toggle scanlist 9 you press 9 If

you wish to toggle scanlist 9, 11, and 22 simply press

the following 9 . 11 . 22 or 9 . 11 . 22 . or 9 . 11 . 22..

To lock out objects:

1. From main menu, select Browse Objects, then press

.

2. Use the  keys to browse objects then press

MENU.

3. Select Locked Out and press . A checkmark ( )

indicates Lockout is selected. A square () indicates

Lockout is disabled. An uppercase L in the display

indicates a locked out frequency.