User Manual

52
To skip transmissions while scanning:
1. Wait for scanner to stop on the transmission and
press SKIP. An uppercase S in the display indicates
a skipped object.
2. To skip a specific object, you can browse to the
object and press SKIP.
3. To restore a skipped object, browse to it and press
SKIP.
4. To restore all skipped objects, in the main menu,
select Restore Skipped and press .
NOTE: If the specific object is locked out vs. skipped
the SKIP button may have been programmed as
Lockout function.
TIP: Consider how you plan to organize your objects
for scanning. You can organize your scan lists
geographically, assigning objects for your location in
one list and objects for other locations in different lists.
You can organize your scan lists by trunking system,
assigning TGRP objects associated with specific trunked
radio systems to separate lists.
To rename a Scanlist:
1. Select Scanlist from the main menu, and then press
.
2. Select a Scanlist and press . The Scanlist name
appears.
3. Press  or  to move the cursor; press  or 
to change the character. Press SKIP to delete a
character.
To set priority objects. Priority is used only when
you want regular scanner operation interrupted to
hear something on your priority object(s):
1. Browse to the object and press Menu.
2. Select Priority and press . A checkmark ( )
indicates a Priority is selected. A square (  )
indicates Priority is disabled.
NOTE: To set priority, Priority Mode must be enabled in
the Configuration menu. Setting any object as a priority
can cause normal scanner interruption.
Scanlist and Scan Sets
There are 20 Scan Sets that work in conjunction with
Scanlists to provide additional scan object selection
capability and flexibility. Each Scan Set contains a list
of all 200 normal Scanlists plus the special SKYWARN
®
Scanlist.