User Manual

54
To use Spectrum Sweeper:
1. In the main menu, select Search, and press  to
enter the search menu.
2. Select Spectrum Sweeper and press .
3. Select All Bands or Public Safety and press right
() to start the search. Spectrum Sweeper sweeps
through frequency ranges in 1 MHz blocks.
4. Press MENU to stop search which enters Sweeper
menu where you can select fewer bands to search.
To perform a Service Search:
1. In the main menu, select Search, and press  to
enter to the search menu.
2. Select Service Search and press .
3. Scroll through the available services, select a
service, and press  to start the search.
4. Press MENU to stop search which enters service
menu.
To perform a Limit Search:
1. In the main menu, select Search, and press  to
enter to the search menu
2. Select Limit Search , and press . The search
begins immediately.
3. To change the search range, press MENU.
4. Scroll to Lo and press .
5. Press  or  to move the cursor; press  or  to
change the value.
6. Press SEL to save the new value and return to the
search menu.
7. Scroll to Hi and press .
8. Press  or  to move the cursor; press  or  to
change the value.
9. Press SEL to save the new value and return to the
search menu.
10. Press  to continue the search.
11. Press MENU to stop search when enters Limit
Menu
To save found frequencies:
1. Press MENU.
2. Then select Store Channel and press SEL. EZ Scan
adds the frequency to the default Scanlist and
names it based on the search type.