User Manual

To activate Weather Priority:

1. Press to begin scanning for weather frequencies.

When scanner stops on the strongest NOAA

channel, press MENU.

2. Select Priority and press  or  to select the

channel. Be aware that normal scanner audio will be

regularly interrupted when the scanner jumps away

to check for a weather alert.

3. Scroll to Save Changes and press /II/SEL or  to

save.

SKYWARN

During severe weather SKYWARN® repeaters relay

severe weather reports from Amateur Radio operators

in the field to local National Weather Service offices.

When there is no severe weather these repeaters are

used for routine communications by licensed Amateur

Radio operators. Monitoring SKYWARN®, you will

hear actual reports as they are called in. You will hear

locations near you and you will hear those reports

minutes before they are relayed on NWS Weather

broadcasts and much sooner than on radio or TV.

To import SKYWARN® Frequencies:

1. Browse for SKYWARN® frequencies in the EZ Scan

library and import them to the SKYWARN® Scanlist.

If not found in the library, check with a local

Amateur Radio club. Find a local one at

www.arrl.org.

2. Enable the SKYWARN® Scanlist.

To activate SKYWARN®:

1. Press once to enter Weather Mode.

2. Press again to activate SKYWARN®.

NOTE: SKYWARN® temporarily disables all other

Scanlists. Remember, local EOC offices (county sheriff

or local police) are an important part of SKYWARN®.

Feel free to add EOC talkgroups to your SKYWARN®

scanlist.

SKYWARN® and the SKYWARN® logo are registered trademarks

of the National Oceanic and Atmospheric Administration, used with

permisission