User Manual

62
• Search Dg AGC – Applies Digital AGC to found
digital transmissions.
• G AGC Mode – Enables Global AGC.
• G AGC On – Activates Global AGC.
• Scan Sets Opt - Turns on Scan Set Feature.
• Sounds – Sets EZ Scan beeps and alert sounds.
• Alerts –Controls audio alerts.
• Key Beeps – Enables or disables key tones.
• Beep Volume – Sets key tone volume.
• Alert Volume –Object volume.
• Contrast – Sets the LCD contrast.
• Lite Mode - Sets the backlight mode to On, Normal,
Key, Ignore or Stealth.
• Lite Area – adjust backlight and keypad light
settings.
• Lite Time – Backlight duration.
• Lite Level –Controls backlight brightness.
• Knob Dflt - Selects SQ or VOL.
• Knob T/out - Selects time from levels 1-10 sec.
• Welcome Text 1-5 – Sets the text displayed on five
lines of the display when the scanner is first turned
on.
 Expert 
• Skip - Programmed to “lockout” will permanently
locks out an object when the SKIP button is pressed.
• Blink Time 1-2 – Controls the amount of time each
item is displayed.
• Show Radio ID – Displays the Radio ID for trunked
systems, if available. Tag Only.
• Use RID Alert –Controls alert for Radio ID
transmissions.
• Show VC/CC – Displays voice and control channel.
Simple Display must be unchecked. Show Radio ID
will override if available.
• Show TGID – Displays talkgroup ID. Simple Display
must be unchecked.
• Show Site Name – Displays trunking site
name, only if two or more trunking system sites are
programmed. Simple Display must be unchecked.
• CONV TGID – Displays the talkgroup ID for P25/
DMR conventional talkgroup calls. Simple Display
must be unchecked.