User Manual

64
Using EZ Scan Software to
Update the Scanner
1. Turn off the Scanner.
2. Connect the scanner to your computer using
the USB cable supplied. The computer should
recognize the scanner’s SD card as a new
drive. If an auto run screen appears, close it.
3. Select Check for CPU Firmware Update in the
update menu.
4. Click Check for Updates on the update screen.
5. If there are available updates, click Update My
Scanner.
6. Please be patient, this can take several minutes.
When complete, click Done.
DSP Firmware Updates
1. Turn off the Scanner.
2. Connect the scanner to your computer using
the USB cable supplied. The computer should
recognize the scanner’s SD card as a new
drive. If an auto run screen appears, close it.
3. Select Check for DSP Firmware Update in the
update menu.
4. Click Check for Updates.
5. If there are available updates, click Update My
Scanner.
6. Please be patient, this can take several minutes.
When complete, click Done.
Updating the Library (PC)
To update the PC library:
1. On the Library Import Tab, click the Update
Channels button. A second Import screen appears.
2. Click the Update Channels button. The library will
be updated to the latest version.
NOTE: The procedure to update the RadioReference
library requires an internet connection.