User Manual

68
03-02 Cluster size bad Reinsert the SD card to ensure it is fully inserted in
locked in the SD card slot. If necessary, reformat the
SD card using the PC Application "Prepare SD Card
for use" option. Replace the SD card if the problem
persists.
03-03 Error reading
SD card
Reinsert the SD card to ensure it is fully inserted in
locked in the SD slot. If necessary, reformat the SD
card using the PC Application "Prepare SD card for
use" option. Replace the SD card if the problem
persists.
03-04 Error writing SD
card
Reinsert the SD card to ensure it is fully inserted in
locked in the SD slot. If necessary, reformat the SD
card using the PC Application "Prepare SD card for
use" option. Replace the SD card if the problem
persists.
03-05 SD card is full Reduce size of configuration, remove unnecessary
audio recordings or switch to a SD card with more
capacity.
03-06 SD card write
protected
Reinsert the SD card to ensure it is fully inserted in
locked in the SD slot. If necessary, reformat the SD
card using the PC Application "Prepare SD card for
use" option. Replace the SD card if the problem
persists.
03-07 Mass storage is
write protected
Under normal conditions this error should not appear.
Mass storage device mode is disabled when the
scanner is connected to a computer and scanning.
03-08 Unknown SD card
read/write error
Reinsert the SD card to ensure it is fully inserted in
locked in the SD card slot. If necessary, reformat the
SD card using the PC Application "Prepare SD Card
for use" option. Replace the SD card if the problem
persists.
04-00 Initialization error Contact Support and provide error code information
04-01 Initialization error Contact Support and provide error code information
04-02 Firmware load
error
Contact Support and provide error code information
05-00 Unable to load
CONFIG_.BIN
Reformat the SD card using the PC Application
"Prepare SD Card for use" option. Replace the SD
card if the problem persists.
05-01 CONFIG_.BIN
file error
Reformat the SD card using the PC Application
"Prepare SD Card for use" option. Replace the SD
card if the problem persists.
05-02 CONFIG_.BIN
file error
Reformat the SD card using the PC Application
"Prepare SD Card for use" option. Replace the SD
card if the problem persists.
05-03 CONFIG_.BIN
file error
Reformat the SD card using the PC Application
"Prepare SD Card for use" option. Replace the SD
card if the problem persists.