User Guide

19
Scanner Cloning
If you have access to a compatible scanner that is
already programmed for your area, you can transfer
that scanner's programming using a standard stereo
patch cord (not included), terminated with 1/8” male
stereo plugs at each end.
The WS1065 is compatible with the following scanner
models: PRO-106, PRO-197, PRO-651, PRO-652, GRE
PSR-500, PSR-600, Whistler WS1040 and WS1065.
To clone a scanner:
1. Connect the two scanners at their PC/IF ports.
2. Turn on both scanners.
3. On the source scanner, press PROG.
4. Press the GLOB softkey.
5. Use the 4-direction keypad to locate the Clone
Send option.
6. Press SEL to transfer data.
CLONING