User Guide

Priority Scan

You can designate increased priority to certain objects:

• CONV – The scanner samples objects for activity

more frequently.

• TGRP – The scanner checks the priority object first

and during reply delays of non-priority objects.

To set priority for objects:

• While scanning, when the scanner stops for a

transmission, press PRI.

Note: plD will change to PlD indicating priority is set.

• In Manual or Program modes, browse to the object

and then press PRI.

Note: plD will change to PlD indicating priority is set.

• You can edit an object's Priority setting directly

during programming.

To activate Priority Scan Mode:

While the radio is scanning, press FUNC and then

press PRI. Repeat to cancel Priority Scan Mode.

NOTE: Priority sampling may cause brief muting of

received audio if another object is active.

Scanning

1 . 3 . . . 7 . . . PRI

. . . . . . . . . .

Priority On

Priority Off

Scanning

1 . 3 . . . 7 . . . pri

. . . . . . . . . .

PRIORITY SCAN