User Guide

46
Configuring
Your WS1065 scanner includes Global Settings that
store radio-wide settings.
Caution: The Special Global Settings menu (PROG
+ GLOB) includes parameter settings that, if not set
properly, may adversely affect the performance of your
radio. We recommend caution when changing these
settings.
NOTE: Each parameter includes a Dflt softkey that
restores the factory default setting.
Context sensitive help is available for all parameters.
Press FUNC and then SEL to view help. Press SEL
again to exit help.
GLOB Menu Reference
Contrast – Sets LCD contrast.
Owner – Sets Welcome Message text display.
Clone Send – Press SEL to send data to clone.
Alert Mode – Tone, Light, Both, or Off.
Sound Mode – Key or Stlth (Silent).
Key Beeps – On or Off.
Light Mode – Norml, Delete Key, Ignre, On, or Stlth.
Light Level – Dim, Brit, or Off.
Dim LED – Yes or No.
Atten Mode – Attenuator reduces interference from
nearby transmitters. Global applies attenuation to all
objects. Normal uses object attenuator settings.
Global Atten – On or off.
Clear Hits – Press SEL to clear all hit counters.
Hit Counts – Toggles the hit counter feature.
Dflt ScanList – Sets the default scan list for new
objects (0-22).
CONFIGURING / GLOBAL MENU