User Guide

Initializing Global Settings

You can reset the global radio parameters to their

factory state without losing information stored in the

scanner’s working memory. However, any changes to

the radio’ s global settings will be lost.

NOTE: V-Scanner memory is not affected by this

operation.

To initialize Global settings:

1. Turn off the scanner, then turn it on again.

2. When the Welcome/Ownerscreen appears, press

0. The scanner displays:

3. Press 2. The scanner displays:

4. Press ENT. The scanner displays:

5. Press any key to proceed. The scanner reboots

with default global parameters.

System Tests:

Select a Test...

Exits if no key

is pressed

Init GLOB data

To factory state

ENTER if APPROVE

CLEAR to EXIT

GLOB EEPROM area

Initialized to defaults.

Press any key.

INITIALIZING GLOBAL SETTINGS