Use and Care Manual

OPERATION

Some Powerful Advice.

When driving with the inverter in operation, make certain that

neither the inverter nor the power cords will impede safe

operation of your vehicle. Keep the unit and all cords clear of the

steering wheel, gas, brake and clutch pedals and gear shift.

To maintain your inverter in proper working condition, note the

following important safety precautions:

• MOISTURE. Keep the inverter dry. Do not expose it to moisture.

Do not operate the inverter if you, the inverter, the device being

operated or any other surfaces that may come in contact with

any power sources are wet. Water and many other liquids can

conduct electricity which may lead to serious injury or death.

• HEAT. For peak efficiency, the ambient air temperature should

be between 50° and 80° F. Avoid placing the inverter on or

near heating vents, radiators or other sources of heat. Do not

place the inverter in direct sunlight.

• VENTILATION. In order to disperse the heat generated while

the inverter is in operation, keep it well ventilated. While in use,

maintain several inches of clearance around the top and sides

of the inverter.

• FUMES & GASES. Avoid using the inverter near flammable

materials. Do not place the inverter in areas such as battery

compartments. Where fumes or gases may accumulate.