Operation Manual

2. Tilting
3.
Oscillation
Maintenance
z BEFORE CARRYING OUT ANY MAINTENANCE, REMOVE THE PLUG FROM THE
SUPPLY SOCKET.
z Do not let any water get into the motor.
z Use a soft damp cloth to clean the fan blade and the guards, then dry them.
z Do not use thinners, alcohol, or other chemicals to clean the fan.
Preservation
After maintenance, please carry out the following steps before storing the fan.
1. Apply a few drops of lubricant on to the motor shaft to prevent corrosion.
2. Remove any oil or dirty stains from the fan.
3. Store the fan in a dry place and do not disassemble the guard.
● For safety, ensure the fan is switched off.
● Hold the stand firmly with one hand, and move the guard
gently up or down.
● Press the oscillation control knob down to make the fan
oscillate. Pull it up to stop oscillation.
● When operating this control, we suggest that it is best not
to reach across
the front of the fan. This reduces the risk of
loose items of clothing, sleeves, etc, entering the front guard.