SDS

Section 2. Hazards identification
Prevention
:
Obtain special instructions before use. Do not handle until all safety precautions have
been read and understood. Wear protective gloves. Wear eye or face protection.
Wear protective clothing. Use only outdoors or in a well-ventilated area. Avoid
breathing vapor. Wash hands thoroughly after handling.
Response
:
IF exposed or concerned: Get medical attention. IF INHALED: Remove person to
fresh air and keep comfortable for breathing. Call a POISON CENTER or physician if
you feel unwell. IF ON SKIN: Wash with plenty of soap and water. Take off
contaminated clothing and wash it before reuse. If skin irritation occurs: Get medical
attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get
medical attention.
Storage
:
Store locked up.
Disposal
Dispose of contents and container in accordance with all local, regional, national and
international regulations.
Hazards not otherwise
classified
:
None known.
Please refer to the SDS for additional information. Keep out of reach of children. Do not
transfer contents to other containers for storage.
Supplemental label
elements
WARNING: This product contains chemicals known to the State of California to cause
cancer and birth defects or other reproductive harm. Adequate ventilation required when
sanding or abrading the dried film. If Adequate ventilation cannot be provided wear an
approved particulate respirator (NIOSH approved). Follow respirator manufacturer's
directions for respirator use. DELAYED EFFECTS FROM LONG TERM
OVEREXPOSURE. Abrading or sanding of the dry film may release Crystalline Silica
which has been shown to cause lung damage and cancer under long term exposure.
:
Section 3. Composition/information on ingredients
Calcium Carbonate
≥25 - ≤50
1317-65-3
Polybutene
≤5
9003-29-6
Titanium Dioxide
≤1
13463-67-7
Crystalline Silica, respirable powder
≤0.3
14808-60-7
Ingredient name
CAS number
% by weight
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health and hence require reporting in this section.
Other means of
identification
:
Not available.
Substance/mixture
CAS number/other identifiers
:
Occupational exposure limits, if available, are listed in Section 8.
Mixture
Any concentration shown as a range is to protect confidentiality or is due to batch variation.
Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10
minutes. Get medical attention.
Remove victim to fresh air and keep at rest in a position comfortable for breathing. If it
is suspected that fumes are still present, the rescuer should wear an appropriate mask
or self-contained breathing apparatus. If not breathing, if breathing is irregular or if
respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It
may be dangerous to the person providing aid to give mouth-to-mouth resuscitation.
Get medical attention. If necessary, call a poison center or physician. If unconscious,
place in recovery position and get medical attention immediately. Maintain an open
airway. Loosen tight clothing such as a collar, tie, belt or waistband.
Section 4. First aid measures
Eye contact
Inhalation
:
:
Description of necessary first aid measures
Date of issue/Date of revision
:
7/5/2018
Date of previous issue
:
6/5/2018
Version
:
10
2/11
W70100010
WHITE LIGHTNING® Speed Grip Construction Adhesive
SHW-85-NA-GHS-US