Owner Manual

PAGE
12
Hardware: (2x) Long Bolts, (2x) Nuts,
(2x) Washers, (1x) Side bracket
Locate the two holes on the frame at the
corner of the adjustable base, by the leg.
Find the side bracket with the correct angle
(see Figure 2A). Align bracket with base
holes and attach using (2x) Long Bolts,
(2x) Nuts and (2x) Washers. Repeat this
step for all sides.
KD2 HEADBOARD &
FOOTBOARD BRACKET
HEADBOARD & FOOTBOARD BRACKET
2
Recommended Tools
• Socket Wrench
• Crescent Wrench
Included
(8x) Nut (8x) Washer (8x) Long Bolt (8x) Short Bolt (2x) Side Bracket 1 (2x) Side Bracket 2 (4x) T-Connector
Hardware: (2x) Short Bolts, (2x) Nuts,
(2x) Washers, (2x) T-connector’s
Carefully place the base near its desired
location. Attach each T-Connector with
(2x) Short Bolts, (2x) Nuts and (2x) Washers.
Find the correct height and width for the
headboards/footboards and attach using the
extra bolts or the bolts provided with your
existing furniture. Check that all brackets and
furniture are secured prior to use.
3
Carefully place the base at (Figure 1A) or in
a side L position (Figure 1B).
1
Figure 1A Figure 1B
Figure 2A
*Optional Accessory