Brochure

www.white-rodgers.com
120
RELAYS and
TRANSFORMERS
TYPE 124
Single Pole Normally Open, or Single Pole Double Throw Contacts.
Dust Resistant and Endcaps are Isolated from Bracket
SPECIFICATIONS
Dimensions, 124-105111,-114111,-117111 . . . . 3.56”L x 3.13”W x 2.19”H
Dimensions, 124-305111,-314111 . . . . . . . . . . 4.69”L x 3.13”W x 2.19”H
Weight, 124-105111,-114111,-117111 . . . . . . . . . . 16.0 oz.
Weight, 124-305111,-314111 . . . . . . . . . . . . . . . . . 19.0 oz.
Temperature Range . . . . . . . . . . . . . . . . . . . . . . -40° to +149°F
Terminations, Contacts. . . . . . . . . . . . . . . . . . . .
5
/
16
”-24 UNF-2A thread
Terminations, Coil. . . . . . . . . . . . . . . . . . . . . . . . #10-32 UNF-2A thread
Recommended Mounting . . . . . . . . . . . . . . . . . . . . . . . Vertical plane with coil terminals up
Hardware Torque, Contact Terminal . . . . . . . . . . . . . . . 60 in. lbs. max.
Hardware Torque, Coil Terminal . . . . . . . . . . . . . . . . . . 12-18 in. lbs.
Caution: A back-up wrench must be used to hold the bottom nut stationary.
Type 124
Coil Coil Contact Rating (Amps) – Inductive Load
Model Duty Terminal Bracket Voltage Resistance Contact Voltage Normally Open Normally Closed
Number Cycle Type ➀ Style D.C. (Ohms) ➁ Material D.C. Continuous Inrush Continuous Inrush
124-105111 Continuous 4 Standard 12 13.2 Silver Alloy 12 100 400 – –
124-114111 Continuous 4 Standard 24 53.0 Silver Alloy 24 100 400 – –
124-314111 Continuous 6 Standard 24 53.0 Silver Alloy 24 100 400 50 100
124-117111 Continuous 4 Standard 36 120.0 Silver Alloy 36 100 400 – –
124-317111 Continuous 6 Standard 36 120.0 Silver Alloy 36 100 400 50 100
➀ “4” = Isolated Coil, SPNO
“6” = Isolated Coil, SPDT
➁ Coil resistance in Ohms @ 25°C
➂ Inrush Current: Current applied within the rst 1/2 second of contact closure
TYPE 586
Single Pole Normally Open, or Single Pole Double Throw Contacts.
Water Resistant and Case is Isolated from Bracket
SPECIFICATIONS
Dimensions, 586-114111,-117111 . . . . . . . . . . . 3.69”L x 3.30”W x 2.90”H
Dimensions, 586-317111 . . . . . . . . . . . . . . . . . 4.61”L x 3.30”W x 2.90”H
Weight, 586-114111,-117111 . . . . . . . . . . . . . . . . . 24.0 oz.
Weight, 586-317111 . . . . . . . . . . . . . . . . . . . . . . . . . 26.0 oz.
Temperature Range . . . . . . . . . . . . . . . . . . . . . . -40° to +149°F
Terminations, Contacts. . . . . . . . . . . . . . . . . . . .
5
/
16
”-24 UNF-2A thread
Terminations, Coil. . . . . . . . . . . . . . . . . . . . . . . . #10-32 UNF-2A thread
Recommended Mounting . . . . . . . . . . . . . . . . . . . . . . . Vertical plane with coil terminals up
Hardware Torque, Contact Terminal . . . . . . . . . . . . . . . 60 in. lbs. max.
Hardware Torque, Coil Terminal . . . . . . . . . . . . . . . . . . 12-18 in. lbs.
Type 586 SPNO
Coil Coil Contact Rating (Amps) – Inductive Load
Model Duty Terminal Bracket Voltage Resistance Contact Voltage Normally Open Normally Closed
Number Cycle Type ➀ Style D.C. (Ohms) ➁ Material D.C. Continuous Inrush➂ Continuous Inrush➂
586-105111 Continuous 4 Standard 12 21.0 Silver Alloy 12 200 600 – –
586-108111➃ Continuous 4 Standard 15 32.8 Silver Alloy 15 200 600 – –
586-114111 Continuous 4 Standard 24 84.0 Silver Alloy 24 200 600 – –
586-117111 Continuous 4 Standard 36 189.0 Silver Alloy 36 200 600 – –
586-120111 Continuous 4 Standard 48 336.0 Silver Alloy 36 200 600 – –
586-314111 Continuous 6 Standard 24 84.0 Silver Alloy 24 200 600 100 200
586-317111 Continuous 6 Standard 36 120.0 Silver Alloy 36 200 600 100 200
➀ “4” = Isolated Coil, SPNO
“6” = Isolated Coil, SPDT
➁ Coil resistance in Ohms @ 25°C
➂ Inrush Current: Current applied within the rst 1/2 second of contact closure
➃ Ideal for 12V charging systems
NOTE: CAUTION must be used in coil selection for use in 12 volt
sytems where battery charging may expose coil to continuous,
higher-than-rated voltage. 15 volt coils are recommended.
White-Rodgers will not be responsible for consequences of misap-
plied solenoids.
DC POWER
CONTACTORSSPNO/SPDT