Product Overview

ManualsBrandsWhite Rodgers ManualsHeating Supplies1/2" NPT Zone Valve, Normally Closed (w/ Aux. Switch)

True Champions

WHITE-RODGERS “1300” SERIES HYDRONIC ZONE VALVES

St. Louis, Missouri • Markham, Ontario

www.white-rodgers.com

Hydronic Zone Valves

FOR HIGH AND LOW CAPACITY APPLICATIONS

There are two types of White-Rodgers “1300” series zone valves available, 2-wire and

3-wire, for zoning hydronic systems up to 50 PSI. The valves operate quietly and efficiently

providing you with comfort and reliability.

The valve stem is made of a corrosion resistant stainless steel and has a self aligning barrel-type design, which

uses line pressure to seal off without binding on opening and closing.

The motor can easily be removed from the valve assembly without draining the system, meaning less mess for

you. Automatic recycling manual operator shows valve position at all times. Screw terminal wiring panel for

added convenience. Built-in auxiliary contacts to control burner or circulator relay.

1311 SERIES SELECTION CHART

• 3-wire

• 24V thermostat circuit rating 0.4A (valve current is

0.4A only during opening or closing. For proper

anticipation, select thermostat designed for use

with a 3-wire zone valve)

• Time cycle: 45 seconds/open; 45 seconds/close

1361 SERIES SELECTION CHART

• 2-wire

• 24V thermostat circuit rating 0.2A (valve current

is 0.52A when opening but 0.2A when fully open;

therefore set anticipator for 0.2A)

• Time cycle: 45 seconds/open; 60 seconds/close

REPLACEMENT PARTS

Model Tubing Friction Loss Equivalents

Number Size

Cv Factor Ft. of Tubing

PMax P. Temp.

(I.D. Pipe)

1311/1361 – 102 3/4 23.5 2-1/2 15 PSI 50 PSI 240ºF (116ºC)

1311/1361 – 103 1 37.0 4 15 PSI 50 PSI 240ºF (116ºC)

1311/1361 – 104 1-1/4 42.2 7 15 PSI 50 PSI 240ºF (116ºC)

Model No. Description

F19-0737 Replacement motor with bracket and leads

F19-0190 Replacement motor only (for all models)

Z12ADINV Adaptor, inverted flare pipe to 1/2 sweat

Z34ADINV Adaptor, inverted flare pipe to 3/4 sweat

Z1ADINV Adaptor, inverted flare pipe to 1 sweat

Z12ADFL Adaptor, flare pipe to 1/2 sweat

Z34ADFL Adaptor, flare pipe to 3/4 sweat

Z1ADFL Adaptor, flare pipe to 1 sweat

R4140

The Emerson logo is a trademark and a service mark of Emerson Electric Co.

Summary of content (4 pages)

PAGE 1
True Champions WHITE-RODGERS “1300” SERIES HYDRONIC ZONE VALVES Hydronic Zone Valves There are two types of White-Rodgers “1300” series zone valves available, 2-wire and 3-wire, for zoning hydronic systems up to 50 PSI. The valves operate quietly and efficiently providing you with comfort and reliability.
PAGE 2
Valves Options White-Rodgers Hydronic Zone Valves The series includes several piping options; sweat or NPT bodies, inverted flare, and flare fitting end connections for the standard copper tubing. The zone valves are direct replacements for competitive models from Honeywell and Erie. A CONTRACTOR’S BEST FRIEND Long Life White-Rodgers zone valves are designed for 2-way straight through positioning with return spring for hydronic systems.
PAGE 3
Valves Options White-Rodgers Hydronic Zone Valves The series includes several piping options; sweat or NPT bodies, inverted flare, and flare fitting end connections for the standard copper tubing. The zone valves are direct replacements for competitive models from Honeywell and Erie. A CONTRACTOR’S BEST FRIEND Long Life White-Rodgers zone valves are designed for 2-way straight through positioning with return spring for hydronic systems.
PAGE 4
True Champions WHITE-RODGERS “1300” SERIES HYDRONIC ZONE VALVES Hydronic Zone Valves There are two types of White-Rodgers “1300” series zone valves available, 2-wire and 3-wire, for zoning hydronic systems up to 50 PSI. The valves operate quietly and efficiently providing you with comfort and reliability.