Owner's manual

Product photo/image above may show some available options
Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > [phone] > [phone] > FAX [phone]
E-22-S
Extremity Whirlpools
Last Update: 9/15/09
E Series
22 Gallon
Stationary Whirlpool
E-22-S
Whitehall E-22-S Stationary Whirlpool is
recommended for treatment of the foot, ankle and leg,
to below the knee, with better coverage and greater
patient comfort.
Tank Capacity is 22 gallons
Whirlpool Tank is 28”L x 15”W x 18”D and is
seamless welded construction, fabricated from heavy
gauge, type 304 stainless steel, polished to a satin
finish. Tank rim is reinforced with a concealed
stainless steel rod. Tank bottom is seamless, rounded
coved design to minimize bacteria buildup. Tank is
also provided with an extended stainless steel skirt
flush to the floor line to conceal internal drain piping.
A 2” Combination Drain and Overflow, and a Filler
Spout are provided. (See roughing-in dimensions on
the reverse side).
Turbine Raising and Lowering Device permits
adjustment of desired height and direction of water
agitation towards the area of the body to be treated. It
is spring balanced and provided with a locking device.
Turbine Assembly functions both as agitator and
emptying device. It is equipped with Underwriters
Laboratory listed 1/2 HP jet pump motor protected with
an ABS plastic shell, and automatic thermal overload
protector, and lifetime-sealed bearings. All parts
contacting the water are stainless steel, chrome plated
brass or bronze.
Thermometer is provided with a dual scale, adjust-
able calibration, and a stem inserts into a retainer to
prevent rattle during whirlpool agitation.
GUIDE SPECIFICATIONS
Provide Whitehall Stationary Whirlpool (speci-
fy model number and options) with a 22-gallon
capacity, 28”L x 15”W x 18”D. Whirlpool shall be
fabricated from heavy gauge, type 304 stainless steel.
Construction shall be seamless welded and exposed
surfaces shall be polished to satin finish. Tank shall
have a reinforced rim and shall be fitted with a
stainless steel skirt flush to the floor line. Bottom of
tank shall be a seamless, rounded coved design to
minimize bacteria build up. Provide a 2” combina-
tion drain and overflow, and a filler spout. Provide a
turbine assembly with raising and lowering device
which functions both as agitator and emptying device,
permits adjustment of desired height, direction of
water agitation, and can be locked into place. Turbine
assembly shall be UL listed 1/2 HP jet pump motor
with automatic thermal overload protector, and life-
time-sealed bearings. Provide a thermometer with a
stem retainer to prevent rattle when whirlpool is in
operation.
Use
Member of
U.S. Green
Building Council
Recycleable
Product