Installation Guide

required.
s are properly ushed and cleared to
avoid blockage.
WARNING: Assembly by a professional plumber is required.
Clean all dirt and debris
from supply valves before
proceeding with installation. If
you are replacing an existing
faucet, remove the faucet
from the sink and clean the
surface thoroughly.
3
2
4
5
Connect the exible hoses to the
water supply valves (left to hot
water and right to cold). Make
sure exible hoses are securely
fastened before turning on valve.
6
1. Always turn off water and relieve pressure before working on your faucet.
1. Clean the faucet with mild soap and water, then wipe the faucet dry with soft cloths.
2. Do not use cleaners which contain acids, harsh chemicals, or abrasives.
3. Repeat steps 1-2 whenever necessary.
Installation Guide
WH2070824