Operation Manual

-
4
-
together to store after freezing.
HOW TO PLACE THE REFRIGERATOR
·Adjustable feet
The feet height can be adjusted to adapt the non level floor, Adjustable
f eet
When the refrigerator is moved to a new place, turn the foot
to make the refrigerator level.
·Power supply
The refrigerator is only suitable to single-phase alternating current of 220V - 240V,
(50±1)Hz. If the fluctuation of voltage in your area is beyond the range of above
mentioned, for the safety sake, please add an A.C automatic voltage regulator to the
refrigerator. Uses an individual socket instead the refrigerator. Use an individual socket
instead of a common one-share with other electric appliances.
·Power supply cord
Do not extend or fold the power cord, keep the power cord away from compressor,
because the temperature of the compressor surface would rise when works, otherwise the
insulation would be weakened and current leakage would occur.
·Protection from moisture
Do not locate the refrigerator in the moist place to avoid the metal parts rusty, and do
not spray water on it, otherwise it will weaken the insulation and causes current leakage.
·Keep away from heat
Please keep refrigerator away from heating sources and direct sunshine.
·Stable placing
Floor which refrigerator placed must be flat and solid, do not place the refrigerator in
any soft material such as foam plastic etc. If the refrigerator is not stable, you can
adjust the front feet to level your refrigerator, and do not place anything that make
echo near the refrigerator.