Operation Manual

FAILURE
CODE
FAILURE
INDICATOR
PROBABLE
FAILURE
THE PROCESS
TO BE DONE
Err 05
The start/pause
light and
program end
light blink.
The heater of
your machine or
the heat sensor
has failed.
Shut down your
machine and
unplug. Turn off
your tap and
apply to the
nearest
authorized
service.
Err 06
The program
ready light and
program end
light blink.
Err 07
The start/pause
light,program
ready light and
program end
light blink.
The motor has
failed.
Shut down your
machine and
unplug. Turn off
the tap and
apply to the
nearest
authorized
service.
Err 08
The program
ready light and
program end
light stays on
permanently.
The network
voltage is too
high or too low.
If the network
voltage is lower
than 150V or
higher than
260V, your
machine will
automatically
stop. When the
network voltage
is recovered,
your machine
will continue its
operation.
27