Operation Manual

E1( 3 buttons )

1 2 3 4 5

6 7 8

1-Detergent drawer 5-Program knob

2-Start/pause light 6-Start/pause button

3-Function indicator lights 7-Function buttons

4-Program ready light 8-Program end light

Our product has electronic card and soft-touch buttons.To activate the

functions touch the buttons slightly.

START/PAUSE BUTTON

Used to start a selected program or pause during running.

WARNING!

It is required for the program knob to be brought to O(off)

position before selecting the program or changing a continuing

program.

FUNCTION INDICATOR LIGHTS

When the start/pause button or any function button is pressed,the

corresponding light turns on.The light turns off when the function

button or start/pause button is re-pressed, or when the process

the selected function is completed.

The function indicator lights are also used in failure detection system

mentioned in section 9.

FUNCTION BUTTONS

Rinse hold

This function is recommended to be used when the clothes cannot

be taken immediately after the end of the program.This will

prevent occurrence of wrinkles. When this button is pressed, the

last rinsing water is not drained. For the program to continue from

the same point, repress the same button.