User's Manual

5 6
1.
2.
3.
4.
5.
6.
7.
Switch/gear button
Networking button
Start button
State indicator
Charging port
Magnetic safety rope connection
Fastening bolt
Controller
1
7
5
2
4
3
6
The controller has a built-in magnetic charging interface that connects to the magnetic
charging cable provided by Sublue.
Inspect Device Exterior
After opening the device packaging, carefully check that the contents in the box are not
missing or damaged.
Unboxing Inspection
1
2
Preparation Before Use
Check the Battery Level and Charge the Battery
Charge the controller
Inspect Device Functions
Refer to the relevant instructions below for the specific networking method.
Check that the controller can power on normally and be networked with the Tini
propulsion system*. After networking, press the start button to check that it does not get
stuck and can correctly start and stop the thrusters of the propulsion system. Check that
you can normally switch between speed settings.
In the event of any problem, do not use the product and promptly contact the Sublue
aftersales service center or an authorized aftersales service site.
To charge the controller, use an adapter of 4.5-5.5V, 1A-3A.
*
EN