Instructions / Assembly

5066-10062 - 9-Cube Organizer with Doors ©2019 Whitmor, Inc.
Page 3
3
7
7
F
Gx2
Note: The long dowel
(C) will go all the way
through the top middle
panel (3).
Ex2
Cx2
Cx2
Ex2
7
7
A
A
B
B
• Use two medium screws (G) to attach a magnetic catch (F) to the top middle panel (3).
• Use the drawing below as a guide to insert four long dowels (C) into two middle dividers (7).
• Use four long screws (E) to attach the middle dividers.
Step 1:
•
Place two cam nuts (B) into two middle dividers (7).
• Use the drawing below as a guide to screw two cam screws (A) into the assembled unit.
• Attach two middle dividers (7) to assembled unit. Use a phillips screwdriver to tighten the cam nuts (B).
Step 2: